The products are manufactured according to GS and CE standards. The configuration requirements are the same as YATO's.

The product meets FFU VERY GOOD standard.

* technical parameters:

1. Battery pack :2, lithium battery, 20V, 2000MAH, jiangsu tianpeng a-class quality

2. Charger voltage: 230v-50hz

3. Impact frequency :0-2700 IPM

4. Rated speed: 0-2200rpm

5. Torque: 400 n. M

6. Take 4 1/2" sleeves (17, 19, 21, 23mm), CRV material required, blackening treatment

7. Battery pack with PCB board

8. Power display

9. Metal buckle

10. JD887 motor

11. Take a seat and charge it quickly.

12 switch: JINDING

13. BMC packaging

14 machine surface without burr, good smoothness!!!

* product color (specific to our company's packaging product color scheme standard, the following is only for reference)

1. Product body: 7477C blue (see our company's color block for details)

2. Red is 186C

3. Black is regular black

* random accessories:

1. Manual 1, must be in Arabic

2. One warranty card

3. Quick charge and 1 base

4. 4 sleeves

5. Blow box black

**** please provide a free sample of a prototype ******

**** improvements **** this time

The side of the blow box needs to be labeled, please refer to the design manuscript of our company for details.3. Rated speed: 2300 RPM

4. Torque: 450 n. M

5. With 4 sleeves (17, 19, 21, 22mm)

* product color (specific to our company's packaging product color scheme standard, the following is only for reference)

1. Product body: RAL3000 red, see the color card of sample seal provided by our company for details

2. Black auxiliary handle. Screws should not rust

3. Black start switch

4. Black soft skin

5. Silver gray gear box with black soft glue.

6. Black sleeve, CHROME VANADIUM

7. Black blow box with metal clasp.

8. Black screw

* electronic components table of products (manufactured in full accordance with the requirements of GS certificate)

1. Plug: European two-circle plug, VDE standard, 16A/250V, jy-02

2. Wire: rubber wire, VDE, h07rn-f, 2x1.0mm2, jingyielectronics, exposed 2.5m

3. Capacitor: tns-3h, 0.33nf, 250v-m25/085/21c,VDE,

4. Switch: JIABEN, FD2 8/2 g - X, eight (8). A, 250 v, 5 e4. Take 1 square inductance TUV/GS standard

5. Motor: cold-rolled silicon steel sheet, enameled copper wire, stator diameter 72mm, length 41mm, rotor diameter 44MM, length 41mm

6. There are 2 round inductors beside the carbon brush

7. Case: pa6-gf30, new material

8. Bearing: NZJY608ZZ

9. Wind blade pa6-gf30, diameter 76mm, 12 pieces white

* random accessories:

1. Manual 1, must be in Arabic

2. One warranty card

3. One extra carbon brush

4. 4 sleeves

* provide 2 free rotors +2 free switches for guest maintenance.